Watch How To Set Up A V3 Trade Show Canopy

Suited for any type of terrain, and built to last from the finest materials available, the V3 Pop-Up Tent is truly is the strongest and most durable tent in the industry.

(1)  Place your tent in the center of your setup area. Grab two legs, extend and move backwards while spreading the frame out.

(2)  With a friend put the top on. Take your new top by the corners and throw the top over the partially expanded frame and place all the corners of the top over the corners of the frame.

(3)  Extend the frame further by taking the truss bar and pushing the top and bottom together while moving backwards until the frame is almost fully extended.

(4)  Attach the canopy to the corners by wrapping the two inch velcro straps around the corners. Once the top is securely placed on the corners secure the valance to the top junction pieces of the frame.

(5)  Extend the frame as far as it can go by taking the truss bars and pushing the top and bottom just like you did earlier.

(6)  Lock the frame in place by putting your hand on the top of the corner cap and pushing the leg slider up until it locks in and you hear it click into place. Repeat this for all four corners.

(7)  With a friend, lift two of the legs and slide out the bottom portion, until it locks into place. Repeat this on the other side of the tent.

(8)  Adjust the tent to the desired height and you’re all set! Enjoy!

Check out our V3 Trade Show Canopy Tents!